Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: debconf
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 609
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Version: 1.5.42ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: libelf1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: elfutils
Version: 0.152-1ubuntu3.1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://fedorahosted.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 0.5.7-2ubuntu2
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: mktemp
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: coreutils
Version: 8.13-3ubuntu3.3
Pre-Depends: coreutils (>= 7.4-1)
Description: coreutils mktemp transitional package
 Empty package to facilitate upgrades, can be safely removed.
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: libnl-3-200
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libnl3
Version: 3.2.3-2ubuntu2
Depends: libc6 (>= 2.8)
Conffiles:
 /etc/libnl-3/classid newconffile
 /etc/libnl-3/pktloc newconffile
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://people.suug.ch/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <mmind@debian.org>

Package: coreutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 5464
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 8.13-3ubuntu3.3
Replaces: mktemp, timeout
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libacl1 (>= 2.2.51-5), libattr1 (>= 1:2.4.46-5), libc6 (>= 2.15), libselinux1 (>= 1.32)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc od
 paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon
 sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test
 timeout touch tr true truncate tsort tty uname unexpand uniq unlink
 users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: debianutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.2.1ubuntu2
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel run-parts
 savelog tempfile which.
Original-Maintainer: Clint Adams <clint@debian.org>

Package: initramfs-tools
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 363
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Version: 0.99ubuntu13.5
Provides: linux-initramfs-tool
Depends: initramfs-tools-bin (>= 0.99ubuntu13.5), initramfs-tools-bin (<< 0.99ubuntu13.5.1~), klibc-utils (>= 1.5.9-1), busybox-initramfs (>= 1:1.13.3-1ubuntu5), cpio, module-init-tools, udev (>= 147~-5), findutils (>= 4.2.24), util-linux (>> 2.15~rc1)
Suggests: bash-completion
Breaks: cryptsetup (<< 2:1.1.0-2.1), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), mountall (<< 2.0~), s390-tools (<< 1.8.3-2~)
Conflicts: usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 8801535d9bec98754eea6a172f956d42
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1
 /etc/kernel/postinst.d/initramfs-tools fe7713b9a74a10ed71d1e7dd93afc209
 /etc/kernel/postrm.d/initramfs-tools e22d1ab0d7a7a1b66ae6d71ea4f21938
Description: tools for generating an initramfs
 This package contains tools to create and boot an initramfs for packaged 2.6
 Linux kernel. The initramfs is a gzipped cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: makedev
Status: install ok installed
Multi-Arch: foreign
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3.1-89ubuntu2
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1044
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: shadow
Version: 1:4.1.4.2+svn3283-3ubuntu5.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/pam.d/login f6fd8b05973b278e6a2b7c61bc7732cd
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/login.defs be0977c1c1c84c62823c7d7d4e099067
 /etc/securetty 1a028cba3ab1989a6a3e395720806069
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: gpgv
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 435
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gnupg
Version: 1.4.11-3ubuntu2.9
Depends: libbz2-1.0, libc6 (>= 2.4), libreadline6 (>= 6.0), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libssl1.0.0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 2695
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: openssl
Version: 1.0.1-4ubuntu5.31
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Breaks: openssh-client (<< 1:5.9p1-4), openssh-server (<< 1:5.9p1-4)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: libdbus-1-3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: dbus
Version: 1.4.18-1ubuntu1.7
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gettext
Version: 0.18.1.1-5ubuntu3
Provides: libasprintf0c2
Depends: libc6 (>= 2.8), libstdc++6 (>= 4.1.1)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: module-init-tools
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 315
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: i386
Version: 3.16-1ubuntu2
Depends: libc6 (>= 2.8), upstart-job
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initramfs-tools (<< 0.92bubuntu23)
Conffiles:
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-framebuffer.conf 96f2f501cc646b598263693c8976ddd1
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist-watchdog.conf 55327f9270c8a6257a833c4d127a39e1
 /etc/modprobe.d/blacklist.conf bc6754fa320733c6d239a4bb0148ffd7
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/init/module-init-tools.conf 48db1b767c3148fd83eba59d12fc9a5e
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
Homepage: http://www.kerneltools.org/
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libffi6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libffi
Version: 3.0.11~rc1-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgcrypt11
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 615
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.5.0-3ubuntu0.4
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.10)
Pre-Depends: multiarch-support
Suggests: rng-tools
Breaks: gnupg2 (<< 2.0.17-2ubuntu2), gpgsm (<< 2.0.17-2ubuntu2), libgnutls26 (<< 2.12.7-3)
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger,
 Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: lzma
Status: install ok installed
Priority: required
Section: base
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 9.22-2ubuntu1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Conflicts: xz-lzma (<< 5.1.1alpha+20110809-2)
Description: Compression and decompression in the LZMA format - command line utility
 The Lempel-Ziv Markov-chain Algorithm is a compression method based on
 the famous LZ77 algorithm, and was first introduced by 7-Zip for use in
 7z archives.
 .
 Its main characteristics are a very high compression ratio, with high RAM
 usage, and fast decompression, with low RAM usage. These properties make
 it well suited to embedded uses, such as for ROM (firmware) compression.
 .
 This package provides the lzma command line utility, which has a
 familiar gzip-like interface.
Homepage: http://www.7-zip.org/sdk.html
Original-Maintainer: Mohammed Adnène Trojette <adn+deb@diwi.org>

Package: libuuid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libtasn1-3
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.10-1ubuntu1.4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: lsb-base
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: misc
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lsb
Version: 4.0-0ubuntu20.3
Replaces: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Depends: sed, ncurses-bin
Conflicts: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Conffiles:
 /etc/lsb-base-logging.sh 0aa55cad853be603ce31790c696e394b
Description: Linux Standard Base 4.0 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linux-foundation.org/en/LSB
Original-Maintainer: Chris Lawrence <lawrencc@debian.org>

Package: procps
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 618
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1:3.2.8-11ubuntu6.4
Replaces: bsdutils (<< 2.9x-1), watch
Provides: watch
Depends: libc6 (>= 2.4), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libtinfo5, upstart-job, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Conflicts: libproc-dev (<< 1:1.2.6-2), pgrep (<< 3.3-5), procps-nonfree, w-bassman (<< 1.0-3), watch
Conffiles:
 /etc/sysctl.conf d1cb9fea7a813e02111874f040cfc04b
 /etc/init/procps.conf 96170a339d08797dc90d69b01d6bf610
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://procps.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libgssapi-krb5-2
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 329
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.6
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.7), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.6), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libkrb53 (<< 1.8)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: python-minimal
Essential: yes
Status: install ok installed
Multi-Arch: allowed
Priority: required
Section: python
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: python-defaults
Version: 2.7.3-0ubuntu2.2
Replaces: python (<= 2.4-1), python2.7 (<< 2.7.3)
Depends: python2.7-minimal (>= 2.7.3), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.4-1), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ncurses
Version: 5.9-4
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libpam0g
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam0g-util
Depends: libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: procinfo
Status: install ok unpacked
Priority: optional
Section: utils
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1:2.0.304-1ubuntu1
Provides: procinfo-ng
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.5-5~), libstdc++6 (>= 4.4.0), libtinfo5 (>= 5.6+20070908)
Description: reporter for system information from /proc and /sys
 Procinfo-NG is a small program that gathers some system information from
 diverse files under /proc and /sys and prints it to the screen.
 Procinfo-NG is a complete rewrite of the old system monitoring app procinfo.
Homepage: http://procinfo-ng.sourceforge.net
Original-Maintainer: Giuseppe Iuculano <giuseppe@iuculano.it>

Package: libusb-0.1-4
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libusb
Version: 2:0.1.12-20
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: libpython2.7
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 2861
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: python2.7
Version: 2.7.3-0ubuntu3.6
Replaces: python2.7 (<< 2.6)
Depends: python2.7 (= 2.7.3-0ubuntu3.6), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 2.7)
 Version 2.7 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the shared runtime library, normally not needed
 for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libgpg-error0
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libgpg-error
Version: 1.10-2ubuntu1
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/
Original-Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>

Package: psmisc
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 22.15-2ubuntu1.1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0025+nmu2ubuntu1
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File: preserve user changes to config files.
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.6ubuntu2
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: lsb-release
Status: install ok unpacked
Multi-Arch: foreign
Priority: extra
Section: misc
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lsb
Version: 4.0-0ubuntu20.3
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: http://www.linux-foundation.org/en/LSB
Original-Maintainer: Chris Lawrence <lawrencc@debian.org>

Package: vim-common
Status: install ok unpacked
Priority: important
Section: editors
Installed-Size: 294
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: vim
Version: 2:7.3.429-2ubuntu2.1
Depends: libc6 (>= 2.3.4)
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Conffiles:
 /etc/vim/vimrc newconffile
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains files shared by all non GUI-enabled vim
 variants (vim and vim-tiny currently) available in Debian.
 Examples of such shared files are: manpages, common executables
 like xxd, and configuration files.
Homepage: http://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 475
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: ncurses
Version: 5.9-4
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9-3~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4678
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: perl
Version: 5.14.2-6ubuntu2.4
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libxsloader-perl, perl5-base, perlapi-5.14.2
Pre-Depends: libc6 (>= 2.11), dpkg (>= 1.14.20)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libfile-spec-perl (<< 3.3300), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.23), libxsloader-perl (<< 0.13)
Conflicts: doc-base (<< 0.10.3), libxml-sax-perl (<< 0.99+dfsg-1ubuntu0.1), mono-gac (<< 2.10.8.1-1ubuntu1), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: sysv-rc
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 232
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 0.8.16~exp12ubuntu10.24
Replaces: manpages-pl (<< 20060617-3~)
Depends: ubuntu-keyring, libapt-pkg4.12 (>= 0.8.16~exp12ubuntu10.24), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), gnupg
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: aptitude | synaptic | wajig, dpkg-dev, apt-doc, bzip2, lzma, python-apt
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/kernel/postinst.d/apt-auto-removal a2cfbcc7da391b1d29c78769ecf4e9b6
 /etc/apt/apt.conf.d/20changelog 8baafd95750e9c31c45512ff7bde7043
 /etc/apt/apt.conf.d/01autoremove 4a235dbe7ba66310dbeb803664f3e400
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
 /etc/cron.daily/apt 24804a562eda58422fd0f084c062ef63
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libk5crypto3
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.6
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.4), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa), libkrb53 (<< 1.6.dfsg.4~beta1-9)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.47ubuntu1
Depends: lsb-base (>= 3.0-6), initscripts, upstart-job
Recommends: ifupdown
Conflicts: inetutils-inetd (<< 2:1.4.3+20060719-3), openbsd-inetd (<< 0.20050402-3)
Conffiles:
 /etc/protocols 2e1e463038cc62e7110e33e21552751f
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services f8ab505348ca029cdba1929d2c59d23d
 /etc/init.d/networking f5a562ab343f7e58dd7cb21636429332
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libdrm2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise2
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libdrm-nouveau1a
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise2
Depends: libc6 (>= 2.1.3), libdrm2 (>= 2.4.3)
Pre-Depends: multiarch-support
Conflicts: libdrm-nouveau1
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the nouveau-specific kernel
 DRM services. DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libsepol1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libsepol
Version: 2.1.0-1.2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Original-Maintainer: Russell Coker <russell@coker.com.au>

Package: libpam-modules
Status: install ok installed
Multi-Arch: same
Priority: required
Section: admin
Installed-Size: 727
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.8), libdb5.1, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.0.85), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.3-7ubuntu2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf cbacdff4aa5f51749f191b32754946cb
 /etc/security/namespace.conf c600fa5899cfb3198a01dfba2bf281f3
 /etc/security/namespace.init 114e73ed5f40956527286e6213d305bc
 /etc/security/pam_env.conf ed3f430e418ad366ddb23307a8755249
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf c23fcbb29dda6c1499e6a5e5ade0265e
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: tzdata
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 1563
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2015d-0ubuntu0.12.04
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-wheezy
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libudev0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: udev
Version: 175-0ubuntu9.9
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: udev library
 libudev provides a set of functions for accessing the udev database
 and querying sysfs.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: python
Status: install ok unpacked
Multi-Arch: allowed
Priority: important
Section: python
Installed-Size: 658
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: python-defaults
Version: 2.7.3-0ubuntu2.2
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.3), python-minimal (= 2.7.3-0ubuntu2.2)
Suggests: python-doc (= 2.7.3-0ubuntu2.2), python-tk (= 2.7.3-0ubuntu2.2)
Breaks: python-bz2 (<< 1.1-8), python-csv (<< 1.0-4), python-email (<< 2.5.5-3), update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Homepage: http://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: ifupdown
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 185
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 0.7~beta2ubuntu11.1
Replaces: netbase (<< 4.00)
Depends: iproute (>= 20071016-1), libc6 (>= 2.7), upstart-job, lsb-base, initscripts (>= 2.88dsf-13.3)
Suggests: isc-dhcp-client | dhcp-client, ppp, rdnssd, net-tools
Conflicts: dhcp-client (<< 3.0)
Conffiles:
 /etc/init/network-interface-security.conf 8d6447a035b681f5fa22d168adcf8dec
 /etc/init/network-interface.conf 46f83d98d2a95a8ad03fab33529b82e8
 /etc/init/network-interface-container.conf 7fb0862f8c092b33c16ec0f05387fbfb
 /etc/init/networking.conf d3dc878505e8997b131bad117ad266d5
 /etc/network/if-up.d/upstart 2869783d5379a5acfaff5da1fc428718
 /etc/network/if-down.d/upstart be2d7ca79c30064a88777f8c6c1d19fe
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.
Original-Maintainer: Andrew O. Shadura <bugzilla@tut.by>

Package: mountall
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 263
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: i386
Version: 2.36.4ubuntu0.1
Replaces: upstart (<< 0.6.3-2)
Depends: makedev, udev, plymouth, coreutils (>= 7.1), libc6 (>= 2.9), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libplymouth2 (>= 0.8.1-3), libudev0 (>= 151)
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initscripts (<< 2.88dsf-13.3), policycoreutils (<< 2.0.69-2ubuntu4), usplash (<< 0.5.47)
Conffiles:
 /etc/dbus-1/system.d/Mountall.Server.conf 91b1414af1257d2ef089f84a3e5c1ed1
 /etc/init/mounted-proc.conf 07198659bd06c1442a35882b2fae05fc
 /etc/init/mountall-reboot.conf 43e3c229085a13005b0681a49b2bef51
 /etc/init/mounted-tmp.conf 289fa57d726885147a41b2b1f3695a29
 /etc/init/mounted-var.conf 02f90856c91a46e9cbed1c35b92fec6c
 /etc/init/mountall.conf 4ecc1e75cf68705e15e5e3106066223a
 /etc/init/mounted-dev.conf cf7bea42235e77168c996d774f059c44
 /etc/init/mounted-run.conf b40dc0421f76a9a581e16d91a4ec6137
 /etc/init/mounted-debugfs.conf 462c8aab0d9d4e6e496b1e2be5910edc
 /etc/init/mountall-shell.conf aa05af89db3de044d1cd7f6971b46d9f
 /etc/init/mountall-net.conf feff70cd7006f6763e24263d381940f3
Description: filesystem mounting tool
 mountall mounts filesystems when the underlying block devices are
 ready, or when network interfaces come up, checking the filesystems
 first.

Package: libapt-pkg4.12
Status: install ok installed
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 2970
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: apt
Version: 0.8.16~exp12ubuntu10.24
Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Description: package managment runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 432
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1:3.2-1ubuntu1
Replaces: diff
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: gawk
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: interpreters
Installed-Size: 1252
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1:3.1.8+dfsg-0.1ubuntu1
Provides: awk
Pre-Depends: libc6 (>= 2.11), libsigsegv2 (>= 2.9)
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Original-Maintainer: Arthur Loiret <aloiret@debian.org>
Homepage: http://www.gnu.org/software/gawk/

Package: tar
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 716
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.26-4ubuntu1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libc6 (>= 2.8)
Suggests: bzip2, ncompress, xz-utils
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libsigsegv
Version: 2.9-4ubuntu2
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/
Original-Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>

Package: libdrm-radeon1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise2
Depends: libc6 (>= 2.3.4), libdrm2 (>= 2.4.38)
Pre-Depends: multiarch-support
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the radeon-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libhx509-5-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 357
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.8), libcomerr2 (>= 1.34), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20120311), libroken18-heimdal (>= 1.4.0+git20110226), libwind0-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - X509 support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libmount1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: block device id library
 The device mounting library, used by mount and mount helpers.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: zlib1g
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: zlib
Version: 1:1.2.3.4.dfsg-3ubuntu4
Provides: libz1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: libroken18-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - roken support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for roken support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: adduser
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 568
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.113ubuntu2
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Recommends: ecryptfs-utils (>= 67-1)
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>

Package: locales
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 9152
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: langpack-locales
Version: 2.13+git20120306-3
Replaces: base-config, belocs-locale-data, belocs-locales-bin, libc6 (<< 2.3.6-0ubuntu6), libc6.1 (<< 2.3.6-0ubuntu6)
Depends: libc6 (>= 2.9-0ubuntu10) | libc6.1 (>= 2.9-0ubuntu10)
Conflicts: base-config, belocs-locale-data
Conffiles:
 /etc/locale.alias 6ac3cbee43012440edc6bcbade0a61ce
Description: common files for locale support
 This package provides support for localized environments (locales).
 It installs character and transliteration maps, provides the POSIX
 locale definition and provides common scripts for language pack
 handling.
 .
 The actual locale definitions are not part of this package, these are
 shipped in the language packs and are installed and removed
 automatically.

Package: python2.7
Status: install ok unpacked
Multi-Arch: allowed
Priority: optional
Section: python
Installed-Size: 8559
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.7.3-0ubuntu3.6
Replaces: python-profiler (<= 2.7.1-2)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: python2.7-minimal (= 2.7.3-0ubuntu3.6), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.1, libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libreadline6 (>= 6.0), libsqlite3-0 (>= 3.5.9), libtinfo5
Suggests: python2.7-doc, binutils
Conflicts: python-profiler (<= 2.7.1-2)
Description: Interactive high-level object-oriented language (version 2.7)
 Version 2.7 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: ed
Status: install ok unpacked
Priority: optional
Section: editors
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.5-3
Depends: libc6 (>= 2.11), dpkg (>= 1.15.4) | install-info
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Original-Maintainer: Martin Zobel-Helas <zobel@debian.org>
Homepage: http://www.gnu.org/software/ed/

Package: libgcc1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 146
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gcc-4.6 (4.6.3-1ubuntu5)
Version: 1:4.6.3-1ubuntu5
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.2.4)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: klibc
Version: 1.5.25-1ubuntu2
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Original-Maintainer: maximilian attems <maks@debian.org>

Package: libhcrypto4-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.7), libroken18-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - crypto library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the cryptographic library required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 6.5ubuntu6.8
Replaces: base, dpkg (<= 1.15.0), lsb-release (<< 3.0-8), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3)
Conffiles:
 /etc/debian_version 931870fda5e3f942afc004db670b3cae
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue 395f0639c7e773be1fab2f023041eca1
 /etc/issue.net 6f7d5a30ab78dc560a11d795e3679ef3
 /etc/lsb-release d02fe017c54ffebf0a22d03cbc6746a9
 /etc/os-release 31300c67a13b25ff41e7dcee05df7847
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text 5064fb57493325202dded183ab0c4ebd
 /etc/update-motd.d/99-footer b0541f3c2e55c44149cd92bcc599c94c
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: mount
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 412
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.8), libmount1 (>= 2.20.1), libselinux1 (>= 2.0.15)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libsqlite3-0
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 778
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: sqlite3
Version: 3.7.9-2ubuntu1.1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.7-5
Depends: libc6 (>= 2.1.3), perl-base (>= 5.14.2-6), perlapi-5.14.2
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: quota
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 1408
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.00-3ubuntu1
Depends: e2fslibs (>= 1.37), libc6 (>= 2.7), libdbus-1-3 (>= 1.0.2), libldap-2.4-2 (>= 2.4.7), libnl-3-200 (>= 3.2.3), libnl-genl-3-200 (>= 3.2.3), libwrap0 (>= 7.6-4~), debconf (>= 1.2.9) | debconf-2.0, lsb-base (>= 3.2-13)
Suggests: libnet-ldap-perl, rpcbind | portmap, default-mta | mail-transport-agent
Conffiles:
 /etc/quotatab newconffile
 /etc/warnquota.conf newconffile
 /etc/init.d/quota newconffile
 /etc/init.d/quotarpc newconffile
 /etc/cron.daily/quota newconffile
 /etc/default/quota newconffile
 /etc/quotagrpadmins newconffile
Description: implementation of the disk quota system
 QUOTA is implemented using the BSD system call interface as the means of
 communication with the user level. This is based on the Melbourne quota
 system which uses both user and group quota files.
Homepage: http://sourceforge.net/projects/linuxquota
Original-Maintainer: Michael Meskes <meskes@debian.org>

Package: libreadline6
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: readline6
Version: 6.2-8
Depends: readline-common, libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libncurses5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: ncurses
Version: 5.9-4
Depends: libtinfo5 (= 5.9-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libplymouth2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: plymouth
Version: 0.8.2-2ubuntu31.1
Replaces: plymouth (<< 0.7.0+git20090207-0ubuntu0.1~ppa4)
Depends: libc6 (>= 2.8), libpng12-0 (>= 1.2.13-4)
Breaks: casper (= 1.227), mountall (<< 2.8)
Description: graphical boot animation and logger - shared libraries
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.
 .
 This package contains the shared libraries.

Package: vim
Status: install ok unpacked
Priority: optional
Section: editors
Installed-Size: 1904
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2:7.3.429-2ubuntu2.1
Provides: editor
Depends: vim-common (= 2:7.3.429-2ubuntu2.1), vim-runtime (= 2:7.3.429-2ubuntu2.1), libacl1 (>= 2.2.51-5), libc6 (>= 2.15), libgpm2 (>= 1.20.4), libpython2.7 (>= 2.7), libselinux1 (>= 1.32), libtinfo5
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: http://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>

Package: libwind0-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libc6 (>= 2.3.6-6~), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - stringprep implementation
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libkeyutils1
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: keyutils
Version: 1.5.2-2
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libexpat1
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: expat
Version: 2.0.1-7.2ubuntu1.1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: iproute
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: net
Installed-Size: 977
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 20111117-1ubuntu2.3
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.1
Recommends: libatm1
Suggests: iproute-doc
Conflicts: arpd
Conffiles:
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/ematch_map 0b9befbbbee4b415319b8070f18b9b88
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
Description: networking and traffic control tools
 The iproute suite, also known as iproute2, is a collection of
 utilities for networking and traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2
Original-Maintainer: Debian iproute maintainers <ah-iproute@debian.org>

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 118
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: i386
Source: initramfs-tools
Version: 0.99ubuntu13.5
Depends: libc6 (>= 2.4), libudev0 (>= 147)
Description: binaries used by initramfs-tools
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: libattr1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: attr
Version: 1:2.4.46-5ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.2.1-9
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Original-Maintainer: Clint Adams <clint@debian.org>
Homepage: http://www.gnu.org/software/sed/

Package: libidn11
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 346
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libidn
Version: 1.23-2
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Homepage: http://www.gnu.org/software/libidn/

Package: python2.7-minimal
Status: install ok installed
Multi-Arch: allowed
Priority: optional
Section: python
Installed-Size: 5295
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: python2.7
Version: 2.7.3-0ubuntu3.6
Replaces: python2.7 (<< 2.7.1~rc1-2~)
Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.2.0), python-minimal (>= 2.6.6-3+squeeze1)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 377
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: klibc
Version: 1.5.25-1ubuntu2
Depends: libklibc (= 1.5.25-1ubuntu2)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Original-Maintainer: maximilian attems <maks@debian.org>

Package: e2fslibs
Status: install ok unpacked
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: e2fsprogs
Version: 1.42-1ubuntu2.2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libkrb5support0
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.6
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.3.4)
Pre-Depends: multiarch-support
Breaks: libkrb53 (<< 1.6.dfsg.4~beta1-9)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: wget
Status: install ok unpacked
Multi-Arch: foreign
Priority: important
Section: web
Installed-Size: 596
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.13.4-2ubuntu1.2
Depends: libc6 (>= 2.15), libidn11 (>= 1.13), libssl1.0.0 (>= 1.0.0), dpkg (>= 1.15.4) | install-info
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc newconffile
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: http://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>

Package: base-passwd
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 164
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 3.5.24
Replaces: base
Depends: libc6 (>= 2.8)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libcomerr2
Status: install ok unpacked
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: e2fsprogs
Version: 1.42-1ubuntu2.2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: gnupg
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 1924
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.4.11-3ubuntu2.9
Depends: libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info, gpgv
Suggests: gnupg-curl, gnupg-doc, xloadimage | imagemagick | eog, libpcsclite1
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
 .
 GnuPG does not use any patented algorithms. This means it cannot be
 compatible with PGP2, because that uses IDEA (which is patented in
 a number of countries).
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 680
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.60-24.1ubuntu2
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4)
Conflicts: ja-trans (<= 0.8-2)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/
Original-Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 1075
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.42ubuntu1
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf, liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 596
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.10-1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/

Package: libnl-genl-3-200
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libnl3
Version: 3.2.3-2ubuntu2
Depends: libnl-3-200 (= 3.2.3-2ubuntu2), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: http://people.suug.ch/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <mmind@debian.org>

Package: plymouth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 0.8.2-2ubuntu31.1
Depends: libc6 (>= 2.8), libdbus-1-3 (>= 1.1.1), libdrm-intel1 (>= 2.4.9), libdrm-nouveau1a (>= 2.4.23), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.3), libplymouth2 (= 0.8.2-2ubuntu31.1), libtinfo5, upstart-job, udev (>= 166-0ubuntu4), mountall (>= 2.0), initramfs-tools
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Breaks: gdm (<< 3.0.4-0ubuntu11), kdm (<< 4:4.7.1-0ubuntu3), lightdm (<< 0.9.7-0ubuntu2), lubuntu-plymouth-theme (<= 0.4), lxdm (<< 0.4.1-0ubuntu2), ubuntustudio-plymouth-theme (<= 0.38), xubuntu-plymouth-theme (<< 10.04.4)
Conflicts: usplash
Conffiles:
 /etc/init/plymouth-ready.conf a879350452d6899d167c53b63bf3d53a
 /etc/init/plymouth.conf f8bddf7212b2362f9e37ae9f3a343481
 /etc/init/plymouth-log.conf 65d2943a69f455dec3fed43fd7996d76
 /etc/init/plymouth-upstart-bridge.conf b2c90588cf9a0cd8a91ad58f67aa7e0e
 /etc/init/plymouth-splash.conf 2c0582725491da66e2d09280847e0452
 /etc/init/plymouth-stop.conf 85e687292436631eaa98959be0bad17a
Description: graphical boot animation and logger - main package
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.

Package: upstart
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 1148
Maintainer: James Hunt <james.hunt@ubuntu.com>
Architecture: i386
Version: 1.5-0ubuntu7.3
Replaces: startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Provides: startup-tasks, system-services, upstart-compat-sysv, upstart-job
Depends: libc6 (>= 2.9), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libudev0 (>= 151), sysvinit-utils, sysv-rc, initscripts, mountall, ifupdown (>= 0.6.10ubuntu5)
Suggests: python, graphviz, bash-completion
Breaks: friendly-recovery (<< 0.2.13), libc6 (<< 2.12.1-0ubuntu12)
Conflicts: lxcguest, startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Conffiles:
 /etc/bash_completion.d/upstart 080f7eee4a3f3e5f76197eaa581fb4da
 /etc/dbus-1/system.d/Upstart.conf 64be74cddb0c74b7d98202b40389784c
 /etc/init/control-alt-delete.conf 16e6603524084b63b0f0ca04eb56757e
 /etc/init/tty1.conf f42f2298f711147ecf177054294861a7
 /etc/init/flush-early-job-log.conf 09e959647877c39f6490ad29b8a35a28
 /etc/init/tty6.conf e8ad2f0411614f9c8dc9c4e364763549
 /etc/init/upstart-socket-bridge.conf 5f3eaca09ee1f03d5d0686ea99f8c051
 /etc/init/tty2.conf 0d9326fdda081ac96d92bbc57ff773e4
 /etc/init/tty4.conf 2c78cd865d848bb2674104905151dbe2
 /etc/init/wait-for-state.conf 7a4d89f072e4ba9de84599627e53e011
 /etc/init/failsafe.conf 0b88eeccf6c8fd456e886aa7a76e3291
 /etc/init/shutdown.conf 559659602cefe7e8d3c1e76820f5ae5d
 /etc/init/console.conf 8d79b0205f2daffb473604ce53e1dc83
 /etc/init/tty5.conf 6d5794f72a1098b008e53e326a6bb5a0
 /etc/init/rcS.conf 3c1a7f7685cc4bdeba2e5624ceb75581
 /etc/init/upstart-udev-bridge.conf 2c24bb70877476b5e7016ccf6de745a4
 /etc/init/tty3.conf 6608f08adf00a282358a1eeb9bdcf78e
 /etc/init/rc-sysinit.conf a50c045d9390a6e6c43c18b19cd72fe5
 /etc/init/container-detect.conf 6bae6257355ad7322e7263e567817465
 /etc/init/rc.conf 1b492dd211353c22963ee701a7881cdd
 /etc/logrotate.d/upstart 070767086a27883ec119e1dde779a856
Description: event-based init daemon
 upstart is a replacement for the /sbin/init daemon which handles
 starting of tasks and services during boot, stopping them during
 shutdown and supervising them while the system is running.
Homepage: http://upstart.ubuntu.com/

Package: libsasl2-2
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: cyrus-sasl2
Version: 2.1.25.dfsg1-3ubuntu0.1
Replaces: libsasl2
Depends: libc6 (>= 2.15), libdb5.1
Pre-Depends: multiarch-support
Recommends: libsasl2-modules (= 2.1.25.dfsg1-3ubuntu0.1)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. If you intend to
 use this package on a server that provides SASL authentication, then
 you must install some of the libsasl2-modules* packages.
Homepage: http://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>

Package: passwd
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 2009
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: shadow
Version: 1:4.1.4.2+svn3283-3ubuntu5.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libc6 (>= 2.15), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), upstart-job, libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/init/passwd.conf ea81baf06e4c358225ce22b786ad9e6a
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 3.06ubuntu1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4), upstart-job
Conflicts: nis (<< 3.17-30)
Conffiles:
 /etc/init/hostname.conf 6cfe98f58ae3bf5fed6558696bbcc488
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>

Package: libacl1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: acl
Version: 2.2.51-5ubuntu1
Depends: libattr1 (>= 2.4.46-3), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libpam-runtime
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 296
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 1.5.19), libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libslang2
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 1369
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: slang2
Version: 2.2.4-3ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: initscripts
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 218
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.86.ds1-64), sysv-rc | file-rc, coreutils (>= 5.93), passwd, upstart, mountall (>= 2.28)
Recommends: psmisc, e2fsprogs
Breaks: hostname (<< 2.95ubuntu1~boot2), rsyslog (<< 4.2.0-2ubuntu3~boot1), selinux-policy-default (<= 2:0.2.20100524-9), udev (<< 146-2~boot6), upstart (<< 0.6.3-2~boot4)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogd 267ceea04f703171e6c62f506fda3305
 /etc/init.d/stop-bootlogd 4544c7e1a2d0c713d29424d02faad237
 /etc/init.d/stop-bootlogd-single 648d8624e708151500c5e299a6005afe
 /etc/init.d/halt 6ae1b3b1b8198567a5e32116077f12a2
 /etc/init.d/killprocs 5e404d35091fab6c4889302736ed4602
 /etc/init.d/ondemand cc2a79a545967eec1170dc2bb44468e0
 /etc/init.d/rc.local 2964c1446c6453cdde4213eede97ac38
 /etc/init.d/reboot 1b9db1ef7bfd79b128ef85d5065721a6
 /etc/init.d/sendsigs 3b575caa7457cbe6cf096881064b834b
 /etc/init.d/single dc13cb373c5c098a8fb95424701373e3
 /etc/init.d/umountfs 9b65e42431636b29ab429e1e7471b575
 /etc/init.d/umountnfs.sh 5f3600170b867d5408ad5b4ae6f8aae4
 /etc/init.d/umountroot 3be838222127557f1e03d6c17f4d6eb7
 /etc/init.d/urandom 96d5bd37396a40ab5fe7071139f780fc
 /etc/default/bootlogd 70a108da715299a6e33470eb450669fb
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: libblkid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 256
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Depends: libc6 (>= 2.7), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Conffiles:
 /etc/blkid.conf 7f4c49e01e0a23d2f4b20eeb32e95abb
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libpam-modules-bin
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 194
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam-modules (<< 1.1.3-2)
Depends: libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: findutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 688
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.4.2-4ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/
Original-Maintainer: Andreas Metzler <ametzler@debian.org>

Package: libbsd0
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libbsd
Version: 0.3.0-2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: utility functions from BSD systems - shared library
 This library provides some functions commonly available on BSD systems
 but not on others like GNU systems.
Original-Maintainer: Debian GNU/kFreeBSD <debian-bsd@lists.debian.org>
Homepage: http://libbsd.freedesktop.org/

Package: xz-utils
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 5.1.1alpha+20110809-3
Replaces: xz-lzma (<< 4.999.9beta+20091004-1)
Depends: libc6 (>= 2.7), liblzma5 (>= 5.1.1alpha+20110809)
Suggests: xz-lzma
Breaks: xz-lzma (<< 4.999.9beta+20091004-1)
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: openssh-server
Status: install ok unpacked
Multi-Arch: foreign
Priority: optional
Section: net
Installed-Size: 821
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: i386
Source: openssh
Version: 1:5.9p1-5ubuntu1.4
Replaces: openssh-client (<< 1:3.8.1p1-11), ssh, ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.15), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.10+dfsg~), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, openssh-client (= 1:5.9p1-5ubuntu1.4), upstart-job, libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), lsb-base (>= 3.2-13), procps
Recommends: xauth, ssh-import-id
Suggests: ssh-askpass, rssh, molly-guard, openssh-blacklist, openssh-blacklist-extra, ufw, monkeysphere
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7), ssh-nonfree (<< 2), ssh-socks, ssh2
Conffiles:
 /etc/default/ssh newconffile
 /etc/init/ssh.conf newconffile
 /etc/pam.d/sshd newconffile
 /etc/network/if-up.d/openssh-server newconffile
 /etc/ufw/applications.d/openssh-server newconffile
 /etc/init.d/ssh newconffile
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.org/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: liblzma5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 319
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: xz-utils
Version: 5.1.1alpha+20110809-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: libnih1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libnih
Version: 1.0.3-4ubuntu9.1
Pre-Depends: multiarch-support, libc6 (>> 2.15), libc6 (<< 2.16)
Description: NIH Utility Library
 libnih is a light-weight "standard library" of C functions to ease the
 development of other libraries and applications, especially those
 normally found in /lib.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih
Original-Maintainer: Scott James Remnant <scott@netsplit.com>

Package: libgnutls26
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1084
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gnutls26
Version: 2.12.14-5ubuntu3.9
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.8), libgcrypt11 (>= 1.4.5), libp11-kit0 (>= 0.11), libtasn1-3 (>= 1.6-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: gnutls-bin
Breaks: ccbuild (<= 2.0.1-1), csync2 (<= 1.34-2.2), freewheeling (<= 0.6-1.1), gkrellm (<= 2.3.4-1), libsoup2.4-1 (= 2.31.2-1), libsoup2.4-1 (<= 2.30.1-1), macopix-gtk2 (<= 1.7.4-3), pokerth (<= 0.8.3-3+b1), pokerth-server (<= 0.8.3-3+b1), sipsak (<= 0.9.6-2.1), slrn (<= 1.0.0~pre18-1.1), slrnpull (<= 1.0.0~pre18-1.1), snowdrop (<= 0.02b-9), ssmtp (<= 2.64-4), tf5 (<= 5.0beta8-4), wput (<= 0.6.2-2), zoneminder (<= 1.24.4-1)
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the runtime libraries.
Homepage: http://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgpm2
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gpm
Version: 1.20.4-4
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Original-Maintainer: Peter Samuelson <peter@p12n.org>
Homepage: http://unix.schottelius.org/gpm/

Package: libdb5.1
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1615
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: db
Version: 5.1.25-11build1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Berkeley v5.1 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.1 Berkeley
 database library.
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.14.0-2.1ubuntu2
Depends: libc6 (>= 2.7)
Suggests: bootchart
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf d548110b8916421c5dd31fdf2bd3531e
Description: Tool to organize boot sequence using LSB init.d script dependencies
 The insserv program is used to update the order of symlinks in
 /etc/rc?.d/ with sysv-rc based on dependencies specified in the
 scripts themselves using LSB init.d script headers.
 .
 This allow each package maintainer to specify their init.d script
 relation to other scripts and make it possible to detect and reject
 script dependency loops as well as making sure all scripts start in
 their intended order.
 .
 The program insserv in this package should be used with care and
 together with the sysv-rc package, as using it incorrectly can lead
 to an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Debian-Vcs-Browser: http://svn.debian.org/wsvn/initscripts-ng/trunk/src/insserv/
Debian-Vcs-Svn: svn://svn.debian.org/initscripts-ng/trunk/src/insserv
Original-Maintainer: Petter Reinholdtsen <pere@debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.4-1ubuntu2
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.6)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: dpkg
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 5909
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Version: 1.16.1.2ubuntu7.6
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), libselinux1 (>= 1.32), zlib1g (>= 1:1.1.4), coreutils (>= 5.93-1), tar (>= 1.23), xz-utils
Suggests: apt
Breaks: apt (<< 0.7.7), aptitude (<< 0.4.7-1), dpkg-dev (<< 1.15.8), libdpkg-perl (<< 1.15.8), pinfo (<< 0.6.9-3.1), tkinfo (<< 2.8-3.1)
Conffiles:
 /etc/cron.daily/dpkg b6b8dc21210ea50db7cc4636f521758f
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: http://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: libpcre3
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 431
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: pcre3
Version: 8.12-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.
Original-Maintainer: Mark Baker <mark@mnb.org.uk>

Package: libncursesw5
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 531
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: ncurses
Version: 5.9-4
Depends: libtinfo5 (= 5.9-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.05-7build1
Depends: libc6 (>= 2.2)
Pre-Depends: perl-base (>= 5.14.2-3), perlapi-5.14.2
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/gettext/gettext.pm

Package: ubuntu-keyring
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: misc
Installed-Size: 46
Maintainer: Michael Vogt <michael.vogt@canonical.com>
Architecture: all
Version: 2011.11.21.1
Recommends: gpgv
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: openssh-blacklist
Status: install ok unpacked
Priority: optional
Section: net
Installed-Size: 4092
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.4.1
Pre-Depends: dpkg (>= 1.10.24)
Recommends: openssh-client
Description: list of default blacklisted OpenSSH RSA and DSA keys
 Contains the list of known-bad default OpenSSH keys, for ssh-vulnkeys to
 use when examining suspect keys: DSA-1024, RSA-2048
Original-Maintainer: Kees Cook <kees@outflux.net>

Package: libheimntlm0-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libc6 (>= 2.4), libhcrypto4-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - NTLM support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: busybox-initramfs
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: busybox
Version: 1:1.18.5-1ubuntu4.1
Replaces: busybox-cvs-initramfs
Depends: libc6 (>= 2.11)
Conflicts: busybox-cvs-initramfs
Description: Standalone shell setup for initramfs
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-initramfs provides a simple stand alone shell that provides
 only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: iputils-ping
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: iputils
Version: 3:20101006-1ubuntu1
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.4), libssl1.0.0 (>= 1.0.0)
Conflicts: ping, suidmanager (<< 0.50)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Original-Maintainer: Noah Meyerhans <noahm@debian.org>

Package: libheimbase1-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - Base library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the base library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: diff
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: diffutils
Version: 1:3.2-1ubuntu1
Pre-Depends: diffutils
Description: dummy transitional package for diff -> diffutils
 This is a dummy package to aid in transitioning from diff to diffutils.
 It may be safely removed after upgrading to squeeze.
Homepage: http://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: libgssapi3-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.8), libcomerr2 (>= 1.01), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimntlm0-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.4.0+git20110403), libroken18-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Conflicts: libgssapi3
Description: Heimdal Kerberos - GSSAPI support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for GSSAPI support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libasn1-8-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libc6 (>= 2.8), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - ASN.1 library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the ASN.1 parser required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libbz2-1.0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: bzip2
Version: 1.0.6-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.bzip.org/

Package: libdrm-intel1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise2
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.38), libpciaccess0
Pre-Depends: multiarch-support
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the intel-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libtinfo5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 394
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: ncurses
Version: 5.9-4
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libpciaccess0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libpciaccess
Version: 0.12.902-1ubuntu0.2
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independant way.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libc-bin
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 3318
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: eglibc
Version: 2.15-0ubuntu10.12
Replaces: libc0.1, libc0.3, libc6, libc6.1
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/bindresvport.blacklist d2d1b996add35b65f64a22e9c8413632
 /etc/gai.conf 629c0e2f8276b26c29b95f7ed53074d7
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: Embedded GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * rpcinfo: report RPC information
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: dselect
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 1168
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Source: dpkg
Version: 1.16.1.2ubuntu7.6
Replaces: dpkg-ftp, dpkg-multicd
Depends: libc6 (>= 2.11), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libstdc++6 (>= 4.1.1), libtinfo5, dpkg (>= 1.13.1)
Suggests: perl
Conflicts: dpkg-ftp, dpkg-multicd
Conffiles:
 /etc/dpkg/dselect.cfg b6ea9a8e41b1e977e9ad027c97758735
Description: Debian package management front-end
 dselect is a high-level interface for managing the installation and
 removal of Debian software packages.
 .
 Many users find dselect intimidating and new users may prefer to use
 apt-based user interfaces.
Homepage: http://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: mime-support
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.51-1ubuntu1.1
Recommends: file (>= 3.27-3)
Conflicts: a2ps (<< 4.10.4), metamail (<< 2.7-44)
Conffiles:
 /etc/mime.types newconffile
 /etc/mailcap.order newconffile
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.
Original-Maintainer: Brian White <bcwhite@pobox.com>

Package: libldap-2.4-2
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: openldap
Version: 2.4.28-1.1ubuntu4.5
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.12), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.6.1-0), libgssapi3-heimdal (>= 1.4.0+git20110226), libsasl2-2
Pre-Depends: multiarch-support
Conflicts: ldap-utils (<= 2.1.23-1)
Conffiles:
 /etc/ldap/ldap.conf newconffile
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: libkrb5-26-heimdal
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 628
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: heimdal
Version: 1.6~git20120311.dfsg.1-2ubuntu0.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.15), libcomerr2 (>= 1.41.11), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20120311), libhx509-5-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226), libsqlite3-0 (>= 3.5.9), libwind0-heimdal (>= 1.6~git20120311)
Pre-Depends: multiarch-support
Description: Heimdal Kerberos - libraries
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the Kerberos 5 library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: sysvinit-utils
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 246
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.15), libselinux1 (>= 1.32)
Recommends: upstart (>= 0.6.3-4)
Suggests: sash
Conflicts: chkconfig (<< 11.0-79.1-2), last, sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: multiarch-support
Status: install ok installed
Multi-Arch: foreign
Priority: standard
Section: libs
Installed-Size: 203
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: eglibc
Version: 2.15-0ubuntu10.12
Depends: libc6 (>= 2.13-0ubuntu6)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libedit2
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libedit
Version: 2.11-20080614-3ubuntu2
Depends: libbsd0 (>= 0.0), libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Description: BSD editline and history libraries
 The editline library provides generic line editing and
 history functions.
 .
 It slightly resembles GNU readline
Homepage: http://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/lib/libedit/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libp11-kit0
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: p11-kit
Version: 0.12-2ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for loading and coordinating access to PKCS#11 modules - runtime
 Provides a way to load and enumerate PKCS#11 modules. Provides a standard
 configuration setup for installing PKCS#11 modules in such a way that
 they're discoverable.
 .
 Also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libnih-dbus1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libnih
Version: 1.0.3-4ubuntu9.1
Depends: libnih1 (= 1.0.3-4ubuntu9.1), libc6 (>= 2.3.4), libdbus-1-3 (>= 1.2.16)
Pre-Depends: multiarch-support
Description: NIH D-Bus Bindings Library
 libnih-dbus is a D-Bus bindings library that integrates with the main
 loop provided by libnih.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih
Original-Maintainer: Scott James Remnant <scott@netsplit.com>

Package: libselinux1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 188
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libselinux
Version: 2.1.0-4.1ubuntu1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Original-Maintainer: Russell Coker <russell@coker.com.au>

Package: openssh-client
Status: install ok unpacked
Multi-Arch: foreign
Priority: standard
Section: net
Installed-Size: 2297
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: i386
Source: openssh
Version: 1:5.9p1-5ubuntu1.4
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.15), libedit2 (>= 2.11-20080614-1), libgssapi-krb5-2 (>= 1.10+dfsg~), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth
Suggests: ssh-askpass, libpam-ssh, keychain, monkeysphere, openssh-blacklist, openssh-blacklist-extra
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7)
Conffiles:
 /etc/ssh/moduli newconffile
 /etc/ssh/ssh_config newconffile
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.org/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: vim-runtime
Status: install ok unpacked
Priority: optional
Section: editors
Installed-Size: 22306
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: vim
Version: 2:7.3.429-2ubuntu2.1
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:7.3.429-2ubuntu2.1)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: http://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>

Package: gcc-4.6-base
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 194
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Breaks: dehydra (<= 0.9.hg20110609-2), gcj-4.6-base (<< 4.6.1-4~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libc6
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 9131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: eglibc
Version: 2.15-0ubuntu10.12
Replaces: belocs-locales-bin, libc6-i386
Provides: glibc-2.13-1, libc6-i686
Depends: libc-bin (= 2.15-0ubuntu10.12), libgcc1, tzdata
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: libhwloc0, liblouis0 (<< 2.3.0-2), liblouisxml1 (<< 2.4.0-2), nscd (<< 2.15)
Conflicts: belocs-locales-bin, libc6-i686, prelink (<< 0.0.20090925), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/i686-linux-gnu.conf 1c63da36f33ec6647af1d8faff9b9795
Description: Embedded GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libpng12-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libpng
Version: 1.2.46-3ubuntu4
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: udev
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 1055
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 175-0ubuntu9.9
Depends: libacl1 (>= 2.2.51-5), libc6 (>= 2.10), libglib2.0-0 (>= 2.16.0), libselinux1 (>= 1.32), upstart-job, libudev0 (>= 175), module-init-tools (>= 3.2.1-0ubuntu3), initramfs-tools (>= 0.92bubuntu63), procps, adduser, util-linux (>> 2.15~rc2), upstart (>= 1.4-0ubuntu6)
Suggests: watershed
Conffiles:
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udev-fallback-graphics.conf 8de8db40eddbd151e1ca373ae79fb57a
 /etc/init/udev-finish.conf 28ebb3ad2d2c6ca545d72f3f0769f448
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/init/udev.conf b4fb63a560e94cacf94765c9a371db99
 /etc/udev/udev.conf 8b024b79a468658332fbf2586737907e
 /etc/udev/rules.d/README 3b6de9f3f911176734c66903b4f8735c
Description: rule-based device node and kernel event manager
 udev is a collection of tools and a daemon to manage events received from
 the kernel and deal with them in user-space.  Primarily this involves
 creating and removing device nodes in /dev when hardware is discovered or
 removed from the system.
 .
 Events are received via kernel netlink messaged and processed according to
 rules in /etc/udev/rules.d and /lib/udev/rules.d, altering the name of the
 device node, creating additional symlinks or calling other tools and programs
 including those to load kernel modules and initialise the device.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: iptables
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 1237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.4.12-1ubuntu5
Depends: libc6 (>= 2.15), libnfnetlink0 (>= 1.0.0)
Description: administration tools for packet filtering and NAT
 These are the user-space administration tools for the Linux
 kernel's netfilter and iptables. netfilter and iptables provide
 a framework for stateful and stateless packet filtering, network
 and port address translation, and other IP packet manipulation.
 The framework is the successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
Homepage: http://www.netfilter.org/
Original-Maintainer: Laurence J. Lane <ljlane@debian.org>

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.2-2ubuntu2.6
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 286dc423e71186936c39e3507d2d0cf1
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
 /etc/skel/.bashrc 8da3d6b1fdbdfe97c6be8adadce98172
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: util-linux
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 1504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.20.1-1ubuntu3.1
Replaces: e2fsprogs, fdisk, fstrim, linux32, miscutils, schedutils, setterm, sparc-utils
Provides: linux32, schedutils
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2), dpkg (>= 1.15.4) | install-info, debconf (>= 0.5) | debconf-2.0, upstart-job
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libselinux1 (>= 1.32), libslang2 (>= 2.0.7-1), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: console-tools (<< 1:0.2.3-21), fdisk, fstrim, kbd (<< 1.05-3), linux32, schedutils, setterm
Conffiles:
 /etc/init/hwclock.conf 132aa3db7e5a8cf55168e4866052208a
 /etc/init/hwclock-save.conf 4a002046525e338fc23e4418602865c9
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: rsyslog
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 1172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 5.8.6-1ubuntu8.9
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), upstart-job, lsb-base (>= 3.2-14), initscripts (>= 2.88dsf-13.3), adduser, ucf
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp, apparmor (>= 2.3)
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/apparmor.d/usr.sbin.rsyslogd newconffile
 /etc/logcheck/ignore.d.server/rsyslog newconffile
 /etc/default/rsyslog newconffile
 /etc/logrotate.d/rsyslog newconffile
 /etc/init/dmesg.conf newconffile
 /etc/init/rsyslog.conf newconffile
 /etc/rsyslog.conf newconffile
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/
Original-Maintainer: Michael Biebl <biebl@debian.org>
Original-Vcs-Browser: http://git.debian.org/?p=collab-maint/rsyslog.git;a=summary
Original-Vcs-Git: git://git.debian.org/git/collab-maint/rsyslog.git

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.11-7ubuntu3.1
Replaces: cpio-mt
Depends: libc6 (>= 2.6), dpkg (>= 1.15.4) | install-info
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/
Original-Maintainer: Ruben Molina <rmolina@udea.edu.co>

Package: libstdc++6
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 1134
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.11), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libglib2.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 3787
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: glib2.0
Version: 2.32.4-0ubuntu1
Replaces: libglib2.0-dev (<< 2.23.2-2)
Depends: libc6 (>= 2.15), libffi6 (>= 3.0.4), libpcre3 (>= 8.10), libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Pre-Depends: multiarch-support
Recommends: libglib2.0-data, shared-mime-info
Breaks: gdm3 (<< 3.0.3), gnome-control-center (<< 1:3), gnome-session (<< 3.0.0-3), gvfs (<< 1.8), libgtk-3-0 (<< 3.0.12)
Conflicts: bamfdaemon (<= 0.2.92-0ubuntu1), libzeitgeist-gio, wncksyncdaemon
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 0.04-7build1
Depends: libc6 (>= 2.1.3), perl-base (>= 5.14.2-3), perlapi-5.14.2
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: readline-common
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: readline6
Version: 6.2-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libnfnetlink0
Status: install ok unpacked
Priority: extra
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libnfnetlink
Version: 1.0.0-1
Depends: libc6 (>= 2.4)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Original-Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>

Package: libwrap0
Status: install ok unpacked
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.q-21
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.11)
Pre-Depends: multiarch-support
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libkrb5-3
Status: install ok unpacked
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 958
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.6
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.9), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1, libkrb5support0 (= 1.10+dfsg~beta1-2ubuntu0.6)
Pre-Depends: multiarch-support
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libkrb53 (<< 1.6.dfsg.4~beta1-9), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: lsof
Status: install ok unpacked
Priority: standard
Section: utils
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 4.81.dfsg.1-1build1
Replaces: lsof-2.0.35, lsof-2.0.36, lsof-2.0.38, lsof-2.2 (<< 4.73)
Depends: libc6 (>= 2.11)
Conflicts: suidmanager (<< 0.50)
Description: List open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Original-Maintainer: Norbert Tretkowski <nobse@debian.org>

